總述

Summary

滾邊機是于取除輪輞壓合之后生的輪輞邊側鋸齒狀的全積極裝備，以冷滾壓的體例開始修緣至油滑過分的，完工提高 輪輞個人品德的懇請。該裝備要粗加工各尺碼小線輪輞，粗加工產值廣，裝備列席會議精度等級高，采納全積極化風險管理體系，的任務效益高，構造渙散。Roll edge machine is used to remove the burr of rim both edge after rim roll forming, adopt cold rolling way to process the rim edge upto smooth, to achieve the requirements of improving the rim quality. The equipment can process the size at diameter 13-17 inch of car rim line, this machine use fully automated system with high efficiency, compact structure.

規格參數

Specification

轉備規格型號	Model Number	GBJ-350
輪輞非常大高度	Max. Width of Rim Band	290mm
輪輞主要直經	Max. Diameter of Rim Band	18 inches
輪輞輕柔的孔徑	Mini. Diameter of Rim Band	13 inches
輪輞主要的厚度	Max. Thickness of Rim Band	5mm
單邊最大程度滾邊力	Rolling Force of Single Side	1.7Tons
緊縮性工作氛圍	Pressure of Compressed Air	0.4-0.6Mpa
一側中鍵可變劑間斷	Adjustable Distance of Single Si de Roller	150mm
滾邊輪時速	Roller Speed	230r/min

特點

1) 機器運行英式Running Process

入料系統→滾軸拒絕下壓→扭轉彈簧→消弭鋸齒狀→滾軸抓牢→打料→打料裝配飛機起飛→下料機籌劃一鋁件拒絕走進。

全配置主動權化級別高，合理布局松軟，人物作用高。

feed material→ roller wheel press down automatically→ rotation→ remove burr→ roller wheel releases→ material unload→ unloading device goes down→ prepare unloading→ workpiece enters automatically.The equipment has high automatically production level, intensive structure, and high working efficient.

2) 武器裝備全自動化，服務措施提交體例上帶有單動支配、自動支配和自動支配的功能。

轉備工作方案結構由PLC吃妻上癮，安靜靠經得住

The equipment is full automatically, whose operation mode has single operation, manual and auto operation.

Its operation logic is controlled by PLC.

3) 操作接面（HMI）妙手動填報加工處理各系號鋼圈的研究生調劑后基本參數并儲放，以供馬上挪作他用，需要或者是形成轉備內部管理旌旗燈號的沒置請況和城市熱力圖請況。

On operating interface (HMI) can input adjusted parameter of every rim size manually and record them to call parameter instantly. It also shows the set condition of equipment’s external signal and its current condition.

4) 結余料檢修通道技術指標、壓緊輪層面、擋料道德水準、下滾模滾邊傾斜度等工作任務技術指標可造成區別的規格的鋼圈立即停止才能購買到合適的。

The working parameters, like width of loading/unloading path, pressing wheel’s height, material baffle position, roll-edge dip angle of lower rolling tool, can be adjusted according with different rim specifications.

5) 配備全隊調整布局始終不會改變靠經受得了，抗振身體機能好；應有很足的靠經受得了性,在壽命短刻日內有很足的比強度、硬度、始終不會改變性、耐風蝕性、抗委靡性。

Equipment’s over-all structure is stable and reliable with excellent shakeproof ability. It is reliable enough to keep sufficient strength, rigidity, stability, corrosion resistance, fatigue resistance.

6) 雙旋輥架（玩弄）負擔調節器，發動機轉速120~200轉/分，上壓延機自動壓緊，負擔調節器4-8kg/cm2，收入支出表料架高度調節器6"-16.5"，凡事路線控制、狀態控制、有不會有什么有工件表面顯露均悅納自己雙位無接點變得顯露，做顯露滿有信心。

缺件，平靜持續運行時各多種道工序都出現綠燈，有不足時某多種道工序出現亮紅燈并警報響鈴出現，并能雷達回波圖防范。在改換物質時，唯有改換下模硅膠模具，和調濟振紋輥的多角度，調濟同時為四分鐘。

The pressure of double rotation roller rack can be adjusted. Its rotation speed is 120~200r/min. Pressure adjustable range is 4-8kg/cm2 (0.4-0.8Mpa) for pneumatic clamping of upper material pressing roller. Width of material loading/unloading path adjustable range is 6"-16.5". All the stroke control, position control, workpiece display adopt two-position noncontacting sensor vision.

In situation when without workpiece or safe running green indicator lights. When fault occurs, some process will light red indicator and alarm to dial with problems. It just need to change lower tool and adjust angle of deburr roller when change products. The adjustment time is 4 minutes.